This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

DIY IKEA Hack: How I Added Fabric Curtains Inside My Billy Bookcase Doors

DIY IKEA Hack: How I Added Fabric Curtains Inside My Billy Bookcase Doors - wall art inspiration from GS Print Shoppe

If you’ve ever wished your IKEA Billy bookcases looked a little softer, more custom, or a little less cluttered behind those Oxberg glass doors… this DIY is life-changing.

I recently added fabric curtains inside the glass on all three of my Billy towers — including the toppers — and the difference is incredible. It looks high-end, warm, and fully custom without making a single permanent modification.

Below is the exact step-by-step guide and where to get everything! We love a little DIY!


✨ Materials & Tools I Used

  • Fabric of your choice

    • Cut to

      • 30” x 45” for the large main door windows

      • 30” x 20” for the smaller topper windows

  • ¼” Wooden Dowels (36” long) — used as curtain rods

    • Cut each to 14 inches

    • Total needed: 12 rods (two rods per window)

  • 1/4” EZ Cable Clips (15-pack) — these act as tiny brackets to hold your rods

  • Fabric glue OR sewing machine

  • Measuring tape

  • Scissors or rotary cutter

  • Iron/steamer

  • Optional: small bumpers if your doors rattle

Bookcases used:
Three Billy Oxberg bookcases with toppers
https://www.ikea.com/us/en/p/billy-oxberg-bookcase-white-s89581547/


🧵 Step 1: Cut Your Fabric Panels

Cut each piece of fabric to

30” x 45”

for tall doors

30” x 20”

for toppers

This allows you a little wiggle room for size -- it's always better to have more than less!


🧵 Step 2: Create Rod Pockets (Sewn or No-Sew)

Each fabric panel needs two rod pockets:

  • One at the top

  • One at the bottom

These pockets hold the 14” rods so the fabric hangs neatly.

✔️ Option 1: Sewn Rod Pocket

  1. Lay fabric face down.

  2. Fold the top edge down about ¾”–1”.

  3. Press to crease.

  4. Sew a straight line to form the tube.

  5. Repeat along the bottom edge.

✔️ Option 2: No-Sew Rod Pocket (Fabric Glue)

  1. Fold ¾”–1” down along the edge.

  2. Add a thin line of fabric glue.

  3. Press down and secure until dry.

  4. Repeat for bottom pocket.

Both options create clean, sturdy channels for the rods.


📏 Step 3: Cut Your Rods

Use ¼” x 36” dowels and cut each into 14-inch pieces.

You’ll need

12 rods total

(6 windows × 2 rods each)

Lightly sand the ends if needed.


🪟 Step 4: Insert Rods Into the Pockets

Slide one 14” rod into the top rod pocket, and another into the bottom pocket.

Optional:
If you want soft gathers, you can still use ¼” easy clips on the fabric to create micro-pleats, but this step isn’t required for the structure.


🚪 Step 5: Install the EZ Clips + Hang Your Curtain Panels

This step ensures the rods sit perfectly inside the glass area — without hitting anything inside the bookcase, especially that non-removable middle shelf.

You will install four EZ Clips per window (two for the top rod, two for the bottom).


📍 For the SHORT Windows (Toppers)

Topper windows are the small glass sections on the extension units.

Place your clips so that

Top Rod

  • Install two EZ Clips just above the top edge of the glass opening

  • The rod should sit directly above the window frame

Bottom Rod

  • Install two EZ Clips just below the bottom edge of the glass opening

  • The rod should sit right beneath the glass, centered inside the panel

This creates a perfectly framed, evenly tensioned fabric panel.


📍 For the LARGE Windows (Main Doors)

These doors have a fixed middle shelf behind them that cannot be removed, so rod placement is crucial.

Top Rod Placement

  • Install EZ Clips directly above the top edge of the glass, as high as they can go without interfering with the door

  • This gives the fabric a crisp, tailored top line

Bottom Rod Placement

  • Install EZ Clips exactly where the glass stops at the bottom edge

  • The rod must sit just above the wooden panel, high enough so it does NOT hit the fixed shelf when you close the door

Once the clips are installed, simply

  1. Pop the top rod into its two clips

  2. Pop the bottom rod into its clips

  3. Adjust fabric gently

  4. Close the doors and admire the transformation ✨


🎉 Step 6: Admire Your New Custom Billy Bookcases

Once installed, the fabric instantly transforms your Billy units:

  • Adds warmth and softness

  • Hides clutter without blocking light

  • Looks fully custom and built-in

  • Elevates the entire room

  • Stays completely renter-friendly

Your Billy bookcases now look bespoke, charming, and intentionally designed.

Shop Prints for This Look

Ready to try these ideas at home? Here are a few GS Print Shoppe prints that fit this look. Every print is made to order on archival matte paper and comes framed or unframed.

Shop the full Vintage Florals + Still Life collection or browse all prints to find the perfect size and frame for your space.

Keep Reading

Use coupon code WELCOME10 for 10% off your first order.

Cart