Whether you want a giant inspiration wall or just a large stylish place to pin ideas, this DIY XL Pin Board gives you designer results for under $100 — and you can size it perfectly to your space.

You’ll be using insulation foam for padding, fabric for a polished look, and simple hardware to hang it securely. The best part? You can make it any size you want — hallway wall? Office backdrop? Kids’ playroom art board? You name it.

Shop the supplies here:
👉 https://shopmy.us/shop/collections/3391919

What You’ll Need

✔ Backing board (drywall or rigid board)
✔ Foam insulation panel
✔ Hot glue gun + glue sticks
✔ Fabric of your choice
✔ Heavy-duty staple gun
✔ 3" screws + washers
✔ Utility knife or saw for cutting

Still all under $100 total!

Step 1 — Cut Your Board + Foam to Size

First, decide how big you want your pin board. Measure the wall space where it will live, then cut both layers to match.

1️⃣ Measure your desired dimensions
2️⃣ Mark your backing board
3️⃣ Cut the backing board to size
4️⃣ Place foam on top and trace the same size
5️⃣ Cut the foam to match

💡 Tips

• A utility knife works great for foam.

• Use a straight edge or level to keep lines clean..

Now you have a perfectly sized backing + foam pair ready to build.

Step 2 — Glue the Foam to the Board

Now it’s time to attach the padding.

1️⃣ Lay the board flat
2️⃣ Apply hot glue in generous lines or sections
3️⃣ Press the foam onto the board
4️⃣ Smooth and press firmly while the glue sets

This gives you that cushioned push-pin feel without being too soft.

Step 3 — Wrap in Fabric + Staple Like a Gift

This is where it transforms from “hardware store project” to “looks custom and expensive.”

1️⃣ Lay your fabric face-down on your workspace
2️⃣ Center your foam-covered board on top
3️⃣ Pull fabric tightly around the back
4️⃣ Start stapling in the middle of each side, then work outward
5️⃣ Fold corners neatly like wrapping a present

🎁 Pro Tip
Pull firm but don’t overstretch — you want smooth, not warped.

Step 4 — Hang Securely with Screws + Washers

Because this board is big, it needs strong, simple hardware.

1️⃣ Hold the board on the wall where you want it
2️⃣ Use 3" screws with washers at the front corners or key points
3️⃣ Tighten securely but don’t over-crush the fabric
4️⃣ Make sure it’s level before finishing

The washers distribute pressure, keeping everything snug and preventing ripping.

Why This Project Is a Win

✨ Totally customizable size
✨ Looks high-end
✨ Actually functional
✨ Strong + secure
✨ Under $100 total
✨ Perfect for offices, studios, kids’ rooms, classrooms, inspiration walls

Ready to Make Yours?

Build one afternoon project, enjoy for years.
Grab everything you need here:
👉 https://shopmy.us/shop/collections/3391919